橡膠萬能材料試驗機價格 測試項目：（普通顯示值及計算值）
Test items: (common display values and calculated values)
★拉伸應力 Tensile stress ★拉伸強度 tensile strength
★扯斷強度 Tensile strength ★扯斷伸長率 Elongation at break
★定伸應力 Stretching stress ★定應力伸長率 Constant stress elongation
★定應力力值 Constant stress value ★撕裂強度 tear strength
★任意點力值 Arbitrary point force value ★任意點伸長率 Elongation at any point
★抽出力 pull out force
★粘合力及取峰值計算值 Calculation of adhesive force and peak value
橡膠萬能材料試驗機價格 主機配置Host configuration
高強度主機一臺（單臂式結構+雙柱式結構）可選
High strength mainframe one (single arm structure + double column structure) optional
高精度光電編碼器一只
High precision photoelectric encoder one
全數字調速系統和全數字調速電機各一套
All digital speed regulation system and all digital speed motor each set
高精密滾珠絲杠副一套
A set of high precision ball screws
精密圓弧同步減速系統一套
A set of precision arc synchronous deceleration system
高精度負荷傳感器一支
A high precision load sensor
拉伸輔具一套
A set of special drawing aids
聯想計算機一臺
Lenovo computer
噴墨打印機一臺
An inkjet printer
AD800萬能試驗卡一套
AD800 universal test card set
WINDOWS98/2000/XP操作環境下的試驗機軟件一套
A set of test machines dedicated to the WINDOWS98/2000/XP operating environment
橡膠萬能材料試驗機價格 技術參數technical parameter
序號 | 檢 驗 項 目 | 技 術 要 求 |
1 | zui大試驗力Maximum test force | 5000N 100N 200N 500N 1000N 2000N 3000N 5000N |
2 | 試驗力測量范圍Range of test force | zui大負荷的2%~100% |
3 | 位移測量Displacement measurement | 分辨率0.01mm |
4 | 試驗力示值相對誤差Relative error of test force indication | 優于±1% |
5 | 試驗力示值重復性相對誤差Test force, indication, repeatability, relative error | ≤1% |
6 | 試驗力零點相對誤差Relative error of test force zero point | ±0.1% |
7 | 速度范圍Speed range | 0.05-500mm/min |
8 | 速度精度Speed accuracy | 優于±1% |
9 | 有效拉伸空間Effective tensile space | 600mm |
10 | 電源Power Supply | ～220V±10% 50Hz 0.5kW |
11 | 外形尺寸Outline size（mm） | 400*400*1300 |
橡膠萬能材料試驗機價格 儀器功能：
自動停機 | 試樣破壞后，移動橫梁自動停止移動（或自動返回初始位置) |
自動換檔 | 根據試驗力大小自動切換到適當?shù)牧砍?，以確保測量數據的準確性 |
條件模塊 | 試驗條件和試樣原始數據可以建立自己的標準模塊的形式存儲；方便用戶的調用和查看，節省試驗時間自動變速 |
自動變速 | 試驗過程的位移速度或加載速度可按預先編制、設定的程序自動完成也可手動改變 |
自動保存 | 試驗結束，試驗數據和曲線計算機自動保存，杜絕因忘記存盤而引起的數據丟失 |
測試過程 | 試驗過程及測量、顯示、分析等均由微機完成 |
顯示方式 | 數據與曲線隨試驗過程動態顯示 |
試驗軟件 | 中文Windows用戶界面，操作簡便 |
試驗報告 | 可根據用戶要求進行編輯打印 |
批量試驗 | 對相同參數的試樣，一次設定后可順次完成一批試驗 |
自動程制 | 根據試驗要求，用戶可方便的建立自己的試驗?zāi)０澹ǚ椒ā?，便于二次調用，可實現試驗加載速度、應力、應變的閉環試驗控制 |
曲線遍歷 | 試驗完成后，可對曲線進行放大再分析，用鼠標查到試驗曲線上各點對應的數據 |
添加試驗方法 | 用戶可跟據試驗要求，添加試驗方法 |
限位保護 | 具有程控和機械兩級限位保護 |
過載保護 | 當負荷超過額定值3～5%時，自動停機 |
報告顯示 | 自動和人工兩種模式求取各種試驗結果，自動形成報表，使數據分析過程變的簡單，便于用戶 |
Automatic stop
After the specimen has been damaged, the moving beam stops moving automatically (or automatically returns to its original position)
Automatic shift
Automatically switch to the proper range according to the test force size to ensure the accuracy of the measurement data
Conditional module
Test conditions and sample raw data can be stored in the form of their own standard modules. It is convenient for users to call and view, save test time and automatically change speed
Automatic transmission
The displacement, speed, or loading speed of the test process can be automatically completed or programmed by hand, and can be changed manually
Automatic save
At the end of the test, the test data and the curve computer are automatically saved to eliminate the data loss caused by forgetting to save the disk
Testing process
The test process, measurement, display and analysis are completed by Microcomputer
Display mode
Dynamic display of data and curves versus test process
betaware
Chinese Windows user interface, easy to operate
Test report
It can be edited and printed according to user's requirements
Batch test
For the same parameter sample, a batch test can be completed in sequence
Automatic scheduling
According to the test requirements, users can easily set up their own test template (method, easy for two calls), can achieve the test load speed, stress and strain closed loop test control
Curve traversal
After the test is completed, the curve can be amplified and analyzed, and the corresponding data of each point on the test curve can be found with the mouse
Adding test method
Users can add test methods according to the test requirements
Spacing protection
With program control and mechanical two level limit protection
overload protection
Automatic shutdown when the load exceeds 3 to 5% of the rated value
Report shows
Automatic and artificial two kinds of model, obtain all kinds of test results, automatically form reports, so that the data analysis process becomes simple, user-friendly
工作環境條件 Working environment condition
1 在室溫100C～350C范圍內，相對濕度不大于80%；
1 at room temperature 100C ~ 350C range, relative humidity is not greater than 80%;
2 在穩固的基礎或工作臺上正確安裝，水平度為0.2/1000；
2 installed on a firm foundation or bench, level 0.2/1000;
3 在無震動、無腐蝕性介質和無較強電磁場干擾的環境中；
3 in the absence of vibration, non corrosive media and no strong electromagnetic interference;
4 電源電壓的波動范圍不應超出額定電壓的±10%。
4 the fluctuation range of the supply voltage shall not exceed 10% of the rated voltage.
售后服務。
1、保修期內非人為損壞的零部件免費更換，保修期內接到用戶邀請后，zui遲響應時間為4小時內，在與用戶確認故障后，我公司會在48小時內派工程師到達現場進行免費服務，盡快查清故障所在位置和故障原因，并向用戶及時報告故障的原因和排除辦法。
2、保修期內人為損壞的零部件按采購（加工）價格收費更換。
3、保修期外繼續為用戶提供優質技術服務，在接到用戶維修邀請后2天內派工程師到達用戶現場進行維修。并享有優惠購買零配件的待遇。
4、定期及不定期回訪：本項目產品交付驗收合格后，公司每年定期以及不定期進行回訪，保證產品正常使用。
5、軟件升級：終生免費提供新版本控制軟件。
After-sale service。
1, warranty damage free replacement parts, the warranty period the user received the invitation, the latest response time is 4 hours, with the user to confirm the fault, our company will send engineers arrived at the scene for free within 48 hours of service, to identify the fault location and fault reason as soon as possible, and to reason users report failures and troubleshooting.
2, the warranty period, for the damaged parts, according to purchasing (processing) price charges replacement.
3, the warranty period to continue to provide quality technical services for the users, after receiving maintenance within 2 days after inviting users to send engineers to the user site maintenance. And enjoy preferential treatment to buy spare parts.
4, regular and irregular visits: the project product delivery acceptance, the company regularly every year and occasional ephone return visit, to ensure the normal use of products.
5, software upgrades: lifelong free to provide new version control software.
詳詢：
Detailed inquiry: :
